Driver Usb Converter 232 U232 P9
Very New to all this but learning quickly. I am having a major problem with these devices (u232-P9). The admin guide says they are tested and supported. Solving The first issue is not even really a Wyse issue, but actually a XenDeskTop issue, but I thought I would post this here also. When I try to install the drivers per their instructions, nothing seems to happen. The instructions state I should see a new com port and a new usb adapter cable in the device manager, after a reboot. But they are not there.
Mct U232 P9 Driver
Sep 19, 2013 Hi! I bought a U232-P9 USB to COM but I can`t install it because in the disk with the drivers there is no driver for win 7. Can someone tell me what to.
No, I have not tried this on a physical machine but will when I get back on site. I have tried this on a brand new VM through XenCenter, Windows 7 and XP pro. I have tried it through a Xenith session as well.
Do I need to set some Citrix policies somewhere to allow for installs of this sort? Please give as much detail as possible.
Ok, here is my up date after messing around with this well into the night. FWIW, the serial device is a 3M touchscreen with a serial interface.
I am working with The 3M MicroTouch Drivers (MTD from here forward) The TS Monitor is Made by Stealth Computers. I am running XenServer 5.6 sp2, XenCenter Version NOT SURE, XenDesktop 5. I have upgraded the Xenith to 1.6x also. Maybe I should try one that is not upgraded. After some advice and looking around on the XenDesktop forums, I found out about USB redirection and turned it on and created some rules that seem to be allowing some communication between the VM and the USB ports. Things got better but are not 100%. So, now when I plug a USB device into the Xenith, both the Xenith and the VM actually see it.
So, the issue now seems to be true/full communication. I have both a Aten converter and one of the U232-p9s. From what I have read, the U232 device is the only one this is really supported by Wyse. Strangely, I seem to get closer to getting this working with the Aten, But neither one will actually activate the mouse cursor. Both atapters have send and receive indicators on them.
Both will flash to indicate that there is activity when you touch the screen. The Aten gets real active when the MTDs try and load where the U232 just does not seem to get all that excited.
Legacy versions of the MTDs with the Aten device, will actually show that they see the the touch screen. When I run the MTD calibration tool, it will actually act like it recognizes you touching the screen but still no mouse activation. This combination does work on a Physical machine. With the U232 device, I can not get the MTDs to see the monitor in anyway shape or form. I really think this has to do with IRQs and IO addresses but can not get the adapters to show me where they are configured. I will be going through the upgrade release notes for the Citrix software here for a while to see if it is worth attempting getting everything upgraded or just stay were we are for now. Any Insight would be greatly appreciated.
Prolific U232 P9
USB U232-P9 Drivers This page contains drivers for the USB 232 Converter / U232-P9. It's a RS232 Serial to USB converter/adapter (see pictures below). I purchased one a while back, but lost the drivers and couldn't get it working on a new PC. After finally tracking them down, I decided to help others in a similar predicament and built this page.
Usb Converter 232 Software
The below drivers are for OSX, Win98/ME, Windows 2000, Windows XP, Vista, and Windows 7. Version 10.2 Windows98SE/ME/2000/XP/Vista/Win7) Version 1.0/1.3 Mac/Windows98/2K/XP OSX 10.3 drivers (no Intel CPU support).